PT. MIMAKI INDONESIA

JFX500-2131

Specifications

JFX500-2131
Head On-demand Piezo head (6 printheads with 3 staggered configuration)
Print resolution 300dpi, 600dpi, 900dpi, 1,200dpi
InkUV curable ink LUS-120 (C, M, Y, K, W, Cl)
LUS-150 (C, M, Y, K, W)
LUS-200 (C, M, Y, K, W)
LH-100 (C, M, Y, K, W, Cl)
PR-100, PR-200 (Primer)
Supply system Supplied by 2L Ink Station
Ink circulation (*1) White ink circulation by MCT (Mimaki Circulation Technology)
Ink degassing module Equipped with MDM (Mimaki Degassing Module)
Maximum print size (W X D) 2,100 X 3,100 mm (82.7 X 122.0")
MediaSize (W X D) 2,100 X 3,100 mm (82.7 X 122.0")
Height Max. 50 mm (2.0")
Weight Less than 50 kg (110.2 lbs.) / m2
Media table  Air suction by vacuum
 Vacuum area Vertically divided into 4 zones
Print accuracyAbsolute accuracy ± 0.3 mm (0.01") or ± 0.3% from specified print distance
Repeatability ± 0.2 mm (0.01") or ± 0.1% from specified print distance
UV unit  Equipped with UV LED (Light Emitting Diodes)
 Lifetime (*2) About 5,000 hours
Interface USB2.0
Applicable standard VCCI class A, CE Marking, CB Report, UL, RoHS Directive
Power specifications AC 200 – 240 V, 50/60 Hz
Power consumption Less than 2.4 kVA
Operational environmentTemperature 15 – 30 °C (59 – 86 °F)
Humidity 35 – 65 %Rh
Temperature accuracy 18 – 25 °C (64.4 – 77 °F)
Temperature gradient Less than ± 10 °C/h (18 °F)
Dust Equivalent to normal office level
Dimensions (W X D X H) (*3) 4,100 X 4,462 X 1,490 mm (161.4 X 175.7 X 58.7")
Weight (*3) 1,353 kg (2,982.8 lbs.)

*1 MCT works only with white ink.
*2 Reference value. There is no guarantee as to the lifetime.
*3 Ink Station is not included in the dimensions and the weight.
・RasterLink6 and the standard vacuum unit are bundled with the JFX500-2131.
・Inks would not be cured when printing speed is faster than that of draft mode.

  • Some of the screens and printing samples in this website are artificial renderings.
  • Specifications are subject to change without notice.
  • All trademarks or registered trademarks are the property of their respective owners.
  • Inkjet printers print using extremely fine dots, thus colors may vary slightly following replacement of the printing heads. Also note that if using multiple printer units, colors may vary slightly among the units due to slight individual differences among the units.



Precautions for UV printing

Inks and substrates:

  • Please note that properties and adhesion, weather resistance etc. of ink and substrates can vary. Therefore please test materials before printing.
  • Some substrates require primer before printing. Please test materials beforehand or ask your sales representative.

Safety notice:
You are dealing with UV light sources that may harm your health. Please follow below guidelines strictly:

  • Do not look directly into the UV light source nor place your hand, or expose your skin directly to the UV light source.
  • Depending upon print mode, there might occur some VOC emittance from printed parts not yet cured and hardened.
  • In addition, please read the instructions and guidelines of the manual carefully and follow those.

JFX500-2131 Catalog (3.39MB)pdf file

Model

JFX500-2131 Maximum print area: 2,100 x 3,100 mm (82.7 x 122.0")

Related products

Return to Content

PAGETOP