• Follow the steps below to confirm the test printing.

Print a test pattern to confirm that the ink prints correctly.

1. On the LOCAL mode screen, select [TEST PRINT/CLEANING] > [TEST PRINT], press the [ENTER] key.  
The Test Print menu is displayed.

2. Select [Scan Dir.] or [Feed Dir.], then press the [ENTER] key.  
Test printing starts.

---

---

* You can change the layout direction for test printing.
Scan direction: prints repeatedly in the horizontal direction.
Feed direction: feeds the medium and prints repeatedly in the longitudinal direction.

Perform head cleaning [Cleaning] if you observe any ejection failures.  
(e.g., nozzle clogging or deflection)

Example of ejection failures

---

---

3. Check the print results.

---