- Machine cannot turn off the heater alone after the end of the print.
Use AUTO Power-off function to turn off the power on the unit and it will turn off the
heater inclusively.
[How to setup AUTO Power-off function]
It turns off the power on the unit unless there is no input from a user within the
registered period of time.
(1) Go to MENU -> MACHINE SETUP -> AUTO Power-off, and press the [ENTER] key.
Click on Image to zoom
(2) Operate the ▲/▼key to setup the time to run AUTO Power-off, and press the
[ENTER]key.
![](https://d3demexscer4mv.cloudfront.net/archives/046/201410/5452e86dec259.jpg)
![](https://d3demexscer4mv.cloudfront.net/archives/046/201410/5452e8a671532.jpg)