- The following is the basic system configuration.
About specifications for RIP PC, see the product page of TxLink4 and RasterLink6Plus.
- Simultaneous connection of Ethernet and USB 2.0 is not possible.
- Data is transferred from the data crating computer (client PC) to the computer with RIP software
"TxLink4 Lite" or "Raster Link 6Plus" installed via the network.
- Note that RIP software, [TxLink4 Lite] or [Raster Link6] (*1) come with the main unit.
You need to prepare a PC for installing RIP and USB2.0 cable (*2) or LAN cable (*2,3)
to operate TS55-1800.
(*1): You can choose either one of TxLink4 Lite or RasterLink6Plus when purchasing.
(*2): Part is available as MIMAKI optional products.
(*3): When connecting with LAN cable, the following requirements are required for creating a network:
- Category 6 or more LAN cable
- Computer supporting 1000BASE-T
- Switching hub supporting 1000BASE-T (If using hub).