- See the followings.
This issue may occur when the thickness of the cut line is less than 0.1 points.
The symptoms may occur because the cut lines created with the [Frame Extraction] and
[Convert Cut Line] functions in RasterLinkTools have a line thickness setting of 0.001 points.
![](https://d3demexscer4mv.cloudfront.net/archives/046/202404/98601351d2bbe913d0c1eb42473cda94fc4856f6e61c9e4657c30d7c8c0b9184.png)
The symptoms can be avoided by implementing one of the following measures.
Countermeasures
[Method 1]
Place dummy objects outside the cut line and save as EPS.
![](https://d3demexscer4mv.cloudfront.net/archives/046/202404/a60210ee14af1e1efca1b0d44d4d027c21a58481dc8261d9edfc57b91cc1fe10.png)
[Method 2]
Create the cut lines with a thickness of 0.1 points.
* If the cut lines are created using the [Frame Extraction] or [Convert Cut Line]
functions in RasterLinkTools, please adjust the line thickness to 0.1 points.