Print result does not be dried well after print

  • Please check the following contents.

【Recovery Procedure】
Please check the following information.
1. Check the media heater setting
The media surface may not get enough temperature to be dried even if you use a Media heater.
However it will singe if you set a Media heater too close, so please set up a Media heater with checking the actual media surface temperature.

Please see the following manual to see more details.
Precaution when you use external heater
  We recommend you to use this kind of “Contactless temperature instrument” to check the actual media surface temperature.

2. Try to print with more lager print pass
If you print the same image with larger print pass, the printed surface can receive more drying time.
Ex) 4 pass →8 pass

Return to Content