Unusual test draw was printed

  • Please check followings when you found nozzle out, nozzle deflection and mixed color on nozzle test pattern.

[Recovery procedure]

(1) Soft cleaning

(2) Normal cleaning

(3) Hard cleaning

(4) Clean around wiper, cap rubber and around head
  Cleaning success rate will be improved

(5) Ink purge

(6) Nozzle wash (This function can clean stack ink around head nozzles)

(7) Nozzle recovery ( For details, see “OPERATION MANUAL”)

(8) Check installation environment is within specification

(9) If you are still having the same issue, please contact us

Return to Content