PT. MIMAKI INDONESIA

Printer starts to print automatically if data is sent.

  • Please see the following:

If “Start” button is selected in the Auto Execution bar, it will automatically start printing new job such as transferred data from client PC.


If you work on editing job on RasterLinkPro5, select “Stop” (manual mode).
* If you select “Start” (automation mode) in the Auto Execution bar, we highly recommend for
 you to register printing options beforehand so that the same setting would be applied to
 incoming jobs.
 See “Tell me how to apply the same settings automatically to the job (Condition Management)” to learn the set up.


Return to Content

PAGETOP