*The following is created with UJF-3042HG/UJF-6042 + Kebab system + RasterLink6. Click here for the latest models.
◆Ink setting：LH-100 CMYKLcLmWW
* white + color printing
◆Printing conditions：720 x 1200 dpi 16 passes
◆Data size：150 mm x 109 mm
What you will need
【Hardware】
・UJF-3042HG/UJF-6042 + Kebab system
・PC
【Software】
・Design creation software such as Illustrator
・RasterLink6 Ver. 2.0 or later (supplied with the printer)
【Necessary tools before start printing】
・Hexagonal wrench
・Measuring instrument
・Work
・Table spacer 50 + Table legs (supplied with the printer)
【Necessary tools through the whole process】
・Gloves
(Take care not to touch the work with bare hands before printing.)
・UV safety glasses (which protect your eyes from UV lights)
・Cloth
・Alcohol
1. Object measurement
Measure the diameter (X) of the work.
The height (Y) of the print data is the height of the drawing range, and varies with the data to print.
2. Data creation
Using design creation software such as Illustrator, create EPS-format data.
★Points★
・Registration marks, cut lines, margins, and so on are not necessary.
・Data can be rotated with RIP, so you can create data in landscape format.
・Besides EPS, you can use other formats such as JPEG, PDF, and TIFF.
・Circumference = Diameter (X) x 3.14 (φ) mm
3. Work setting
From the diameter of the work, judge the setting position.
The setting location differs with the size of the work to print on, so place the work on the roller suitable for the diameter.
* For information about the advanced settings of Kebab, see the operation manual.
* Using cloth and alcohol, remove any oil and dust adhering to the work.
Set the origin.
1. Enter the diameter.
[FUNCTION]→[WORK SET]→ Enter or adjust diameter of the work by pressing an up or down arrow key on the operation panel of the printer.
2. Turn the gap check function* to [ON].
[FUNCTION]→[Head Height]→[Gap check:ON]
* Gap check function: Automatically adjusts the print head to an optimal height.
This is effective for out-of-round cylinders, whose diameter differs depending on the measurement portion.
3. Set the origin.
[FUNCTION]→[Kebab Origin Set]
Using the arrow key on the printer, move the red light pointer to determine the origin of the work.
4. RasterLink6 setup
On RasterLink6, display the Kebab icon.
・Display the Kebab-dedicated icon only when using Kebab for the first time.
[Environments]→[Printer Management...]→[Function icon]→ Click [Kebab Jig Print] check box. →[OK]
・Send print data to RIP.
On RasterLink6, edit the print data.
・Rotate the print data by 90 degrees.
* For information about the advanced settings of RasterLink6, see the operation manual.
5. Print the data.
* To protect your eyes from UV light, use safety glasses during printing.
Supplementary Information/Notes
・Check the print process.
To use a primer or a clear ink, you must mark the origin by an adhesive tape to read the origin of the work/object.
・Check the rotation direction.
The rotation direction varies depending on the printing conditions.
・Before start small diameter printing, follow instructions as described below.
1. In order to prevent ink mist adhesion to the sensor, reattach the cover to the appropriate place if you have not used the cover.
2. In order to protect the printer, remove the work holder installed on the right side of the main unit, which is used for large diameter printing, because it may collide with the main unit cover.
・Conduct an advance test.
Before starting production, please perform test printing on target materials, and check print results including the degree of ink adhesion, fastness and so on.
