PT. MIMAKI INDONESIA

FineCut/Coat9 for Illustrator

FineCut/Coat9 for Illustrator Ver2.5 Mac (Illustrator CS6 - 2021 (Mac OS X 10.7.5 ~ macOS 10.14))

Type Software
Version 2.5
Release date 01/31/2023
Supported OS Mac OS X(10.7.x)
Mac OS X(10.8.x)
Mac OS X(10.9.x)
Mac OS X(10.10.x)
Mac OS X(10.11.x)
macOS 10.12.x
macOS 10.13.x
macOS 10.14.x
FineCut/Coat9 for Illustrator
Application Adobe Illustrator CS6/CC/CC2014/CC2015/CC2015.3/CC2017/CC2018/CC2019/2020/2021 English/German/French/Italian/Spanish/Russian/Simplified Chinese/Traditional Chinese

About this Upgrade software

  • FineCut9 serial key or FineCut/Coat9 serial key is required after software updating.
  • Free upgrade to FineCut/Coat9 from FineCut8 is available if you have FineCut8 CD-ROM.
  • How to issue a FineCut9 serial key from FineCut8 CD-ROM, please see here.

About installer and others

  • FineCut / Coat9 does not work properly with Illustrator2021 Ver25.0 to Ver25.2.0.
    Please use Illustrator2021 Ver25.2.1 or later.
  • When installation of FineCut/Coat9 in macOS is failed, please refer to here to take measures.
  • How to recognize [KeySpan] USB conversion adapter on macOS High Sierra(10.13) from here.
  • This software cannot be installed in OS that is later than macOS 10.15. Please use this when you use OS that later than macOS 10.15.

The following functions have been change

[Ver2.4 -> Ver2.5]

-Fixed bugs-

  1. Fixed a bug that the cutting with tool which you specified may not be executed in CF3 series.

[Ver2.3 -> Ver2.4]

- Improved function -

  1. Mimaki Register marks SDK is supported.
    Register marks which created based on the Mimaki Register marks SDK with third party software can be recognized by FineCut.

[Ver2.2 -> Ver2.3]

- Improved function -

  1. CG-AR series is supported.
    With the division cutting function, cut misalignment due to sheet meandering can be suppressed.
  2. CJV330 series is supported.

[Ver2.1 -> Ver2.2]

-Fixed bugs-

  1. When the cut data is created using the following functions, it is printed by RasterLink5.
    Frame Extraction / Outline Tool / Move to the Cut Layer / Register Mark Creation [Leave a rectangle as the cutting line].
  2. When "Online information" is started, [Error in the parameter.] is displayed and information cannot be obtained.
  3. Even if [Leaf Mode] is specified in [Detect Mark] function of Plot dialog, it will return to [Roll Mode] when [Detect Mark] is executed at the next time.

[Ver2.0 -> Ver2.1]

- Improved function -

  1. Illustrator (Ver25.3 or later) which supports native support to Apple Silicon is supported.
    FineCut/Coat9 for Illustrator Ver2.1 is supported only in the following System requirements.
    Chip Intel Apple Silicon M1 Chip
    Illustrator (Ver25.3 or later) Running mode - Rosetta Native
    macOS Appearance Light Dark Light Dark Light Dark
    FineCut9 Ver1.5 × × × × × ×
    FineCut9 Ver1.6 - 2.0 × × × ×
    FineCut/Coat9 Ver2.1

-Fixed bugs-

  1. Illustrator exits incorrectly when executing Frame Extraction, Create Shadow / Edge, Trapping, Create Weed Line on Illustrator 2021 (Ver25.4.1).

[Ver1.6 -> Ver2.0]

- Improved function -

  1. The product name has been changed.
    FineCut9 -> FineCut/Coat9

-Fixed bugs-

  1. Fixed the problem that the import / export of the output condition fails depending on the save location of the Output Condition file.
  2. Fixed the problem that the installation is failed in some environments.

[Ver1.5 -> Ver1.6]

- Improved function -

  1. Illustrator 2021 (Ver25.3) is supported.
    FineCut9 for Illustrator Ver1.6 is supported only in the following System requirements.
    Chip Intel Apple Silicon M1 Chip
    Illustrator (Ver25.3 or later) Running mode - Rosetta Native
    macOS Appearance Light Dark Light Dark Light Dark
    FineCut9 Ver1.5 × × × × × ×
    FineCut9 Ver1.6 × × × ×

-Fixed bugs-

  1. Even if EPS option or Adobe PDF save dialog is canceled with ID cut, the cut command is outputted.

[Ver1.4 -> Ver1.5]

- Improved function -

  1. Illustrator 2021 is supported.

-Fixed bugs-

  1. Fixed a bug in which guidelines created by compound paths were output as cut lines.
  2. Fixed a bug in which login user names containing double-byte characters would be recognized as guest users.
  3. Illustrator may crash when using [LineEdit] tool has been fixed.
  4. Fixed a bug in which exporting the output condition with a folder name or file name that contains double-byte characters will fail.

[Ver1.3 -> Ver1.4]

-Fixed bugs-

  1. In CF22-1225, the issue that [Reverse Cut Mode] may not be performed correctly has been fixed.
  2. A crash problem when FineCut 9 is installed on the Korean version of Illustrator has been fixed.
  3. The new information of FineCut9 can be acquired through the online information from this version.

[Ver1.2 -> Ver1.3]

- Improved function -

  1. Illustrator 2020 is supported.

-Fixed bugs-

  1. In some models, wrong value was displayed as a recommended register mark size in FineCut. The wrong value has been corrected .
  2. The output condition setting function by each color and layer for CF3 (M head) can be now used.

[Ver1.1 -> Ver1.2]

- Newly Support -

  1. macOS 10.15 (Catalina) is supported.

[Ver1.0 -> Ver1.1]

- Improved function -

  1. CJV300 Plus is supported.
  2. CG-FXⅡPlus is supported.

[FineCut8 Ver8.7.7 -> FineCut9 Ver1.0]

- Fixed bugs -

  1. When operating weed line in the Weed Line dialog, a problem with slow operation occurred.
  2. The maximum number of favorites have been increased from 10 to 250, so that the problem, the favorite was not registered when there were more than 10 layer colors.
  3. Size in plot preview dialog was not be able to be changed smoothly with mouse.
  4. List display disappeared when you moved the color/layer in the plot preview dialog.
  5. The output condition was not able to be saved by accounts other than the administrator privilege.

New functions of FineCut/Coat9

New functions

  1. It can be now outputted directly to Trotec Speedy 100/300/360/400.
    It can be outputted by the procedure that outputs to Mimaki plotter.
    Register mark cut can be done by manually adjusting the RED pointer of the laser machine to the printed register mark.
  2. CJV300 Plus is supported.
  3. CG-FXII Plus is supported.

About manuals

Download from here.

Precautions for download

Be sure to read the following license agreement before downloading this software.

Software License Agreement

By installing this software, you agree to be bound by this agreement.

Article 1 Definition
  1. Software means the computer program supplied with this agreement.
  2. Related data means printed text data supplied with this software or printed data which we may supply subsequently.
  3. This software means the software, related data and the copy of this software which we supply to you.
Article 2 Limitations
  1. This software must not be copied against the provisions of this agreement.
  2. This software must not be changed or reverse engineered. Moreover, it must not be transferred, leased or sublicensed to the third party. The status of this agreement must not be transferred, either.
  3. This software must not be transferred, licensed or resold to the third party or transferred, licensed or purchased from it by rental or false rental activity.
  4. This software must not be transferred or licensed to the third party or purchased from it as secondhand goods.
Article 3 Limitation of Warranty
  1. It is not warranted that functions contained in this software suit the intended use of the customer.
  2. This software should be selected and introduced in the customer’s responsibility: any damage in installing this software in the computer’s hard disk and the plotter’s memory is not covered.
  3. We accept no responsibility for any results of the use of this software (including lost earnings or profits).
Article 4 Term of Validity
  1. The term of validity of this agreement starts when the customer installs this software.
  2. When the customer decides to stop using this software, this agreement is automatically terminated.
  3. This agreement is terminated immediately, without our notice, if the customer does not follow any clause of this agreement. If this agreement terminates, the whole of this software must be deleted.
Download FC925AIEN107.dmg(94.56MB)

Return back to list

Return to Content

PAGETOP