Specification
JV33-130BS | JV33-160BS | JV33-260BS | ||
---|---|---|---|---|
Head |
On-demand Piezo head (180nozzles x 8 lines) x1 head
|
|||
Maximum print width | 1,361mm (53.5") | 1,610mm (63.3") | 2,632mm (103.6") | |
Printing resolution | 540,720,1,440dpi | |||
Printing mode (scan x feed) |
540 x 720dpi, 540 x 900dpi, 540 x 1,080dpi | |||
720 x 540dpi, 720 x 720dpi, 720 x 1,080dpi, 720 x 1,440dpi |
||||
1,440 x 1,440dpi | ||||
Ink | Type | Exclusive Solvent ink: BS3 ink | ||
Capacity | 600cc cartridge x 2/color | |||
Media | Size | 1,371mm (53.9") | 1,620mm (63.9") | 2,642mm (104.0") |
Roll weight | Less than 25kg (55.1lbs.) | Less than 100kg (220lbs.) | ||
Print surface | Face out | |||
Roll inside diameter | 2 inch or 3 inch | |||
Media cutting | Cutting on Y direction by cutter at the head | |||
Media heater | Triple stage intelligent heater (Pre/Print/Post) | |||
Media Take-up device | Roll take-up device (standard), inside/outside selectable | |||
Interface | USB2.0 | |||
Applicable standards | VCCI Class A,FCC Class A, UL 60950-1 | |||
CE Marking (EMC directive, Low voltage directive), CB report |
||||
Power | AC100~120V±10%, AC220~240V±10%, 50/60Hz±1Hz |
|||
Power consumption | Less than 1,440 VA | Less than 1,440 VA x 2 plugs | ||
Operation environments | Usable temperature:20°C~35°C (64~95°F), Humidity:35~65%RH (No condensation) |
|||
Dimensions (W x D x H) | 2,289 x 739 x 1,424mm (90.1" x 29.1" x 56.1") |
2,538 x 739 x 1,424mm (99.9" x 29.1" x 56.1") |
3,650 x 1,302 x 1,424mm ( 143.7" x 51.3" x 56.1") |
|
Weight | 145kg (320lbs.) | 160kg (353lbs.) | 450kg (992lbs.) |
Ink set
BS3 [C,M,Y,K] |
C M Y K |
---|
- Some of the samples in this website are artificial renderings.
- Specifications, design and dimensions stated in this website may be subject to change without notice (for technical improvements, etc).
- The corporate names and merchandise names written on this website are the trademark or registered trademark of the respective corporations.
- Inkjet printers print using extremely fine dots, so colors may very slightly vary after replacement of the printing heads. Also note that if using multiple printer units, colors could vary slightly from one unit to other unit due to slight individual differences.
Model
JV33-130BS | Maximum print width: 1,361 mm (53.6") |
---|---|
JV33-160BS | Maximum print width: 1,610 mm (63.4") |
JV33-260BS | Maximum print width: 2,632 mm (103.6") |
Corresponding Ink
BS3
Application list
- Sign & Display
- Banner
- Poster
- Vehicle Wrapping
- Wallpaper
- POS Display