Specifications

SIJ-320UV
Head		On-demand piezo head (4 staggered printheads)
Print resolution		300 dpi, 600 dpi, 900 dpi, and 1,200 dpi
Ink droplet size		Minimum: 7 pl　Maximum: 36 pl
Head gap (Manual adjustment)		1.7 mm / 1.9 mm / 2.6 mm / 3.3 mm (Distance between the platen and the print head)
Ink	Type	LED-UV ink LUS-120
		LED-UV ink LU-125 *Only available in specific emerging countries
	Color	C, M, Y, K
	Packaging	1 liter ink bottle Ink can be filled up to 3 liters per ink container of the printer.
Maximum print width		3,200 mm (126 in)
Maximum media width		3,250 mm (127.9 in) (Twin rolls printing with a small drive shaft: 1,524 mm (60 in) × 2)
Minimum media width		210 mm (8.2 in)
Media thickness		1.0 mm or less
Roll outer diameter		Large drive shafts : Φ250 mm or less Small drive shaft with roll holders : Φ180mm or less
Roll weight		Large drive shafts : 100 kg or less Small drive shaft with roll holders : 25 kg or less
Power supply		AC 200–240V ± 10%　50/60Hz ±1 Hz, 15 A or less
Power consumption		3.6 kW or less
Operational environment	Temperature	20 – 30 °C (68 – 86 °F)
	Humidity	35–65 %Rh (No condensing)
	Temperature accuracy	20 – 25 °C (68 – 77 °F)
	Temperature gradient	Less than ± 10 °C/h (± 18 °F/h)
	Dust	0.15 mg/㎥ (Equivalent to normal office level)
Dimensions (W×D×H)		5,410 mm × 995 mm × 1,440 mm (213 x 39.2 x 56.7 in)
Shipping dimensions (W×D×H)		5,750 mm × 1,140 mm × 1,210 mm (226.4 x 44.9 x 47.6 in)
Weight		850 kg (1873.9 lb)

Ink set

LUS-120 ［C,M,Y,K］	C　M　Y　K
LU-125 ［C,M,Y,K］	C　M　Y　K

• Some of the screens and printing samples in this website are artificial renderings.
• Specifications are subject to change without notice.
• All trademarks or registered trademarks are the property of their respective owners.
• Inkjet printers print using extremely fine dots, thus colors may vary slightly following replacement of the printing heads. Also note that if using multiple printer units, colors may vary slightly among the units due to slight individual differences among the units.

---

---

Precautions for UV printing

Inks and substrates:

• Please note that properties and adhesion, weather resistance etc. of ink and substrates can vary. Therefore please test materials before printing.
• Some substrates require primer before printing. Please test materials beforehand or ask your sales representative.

Safety notice:
You are dealing with UV light sources that may harm your health. Please follow below guidelines strictly:

• Do not look directly into the UV light source nor place your hand, or expose your skin directly to the UV light source.
• Depending upon print mode, there might occur some VOC emittance from printed parts not yet cured and hardened.
• In addition, please read the instructions and guidelines of the manual carefully and follow those.

---