Specifications

TS330-3200DS
Print head		On-demand piezo head (2 staggered layout)
Print resolution		300, 600, 1200 dpi
Print gap		By manual 3 levels (3.0/3.5/4.0 mm)
Ink	Type/Color	Sublimation ink Sb420 (Bl, M, Y, K) Sb411 (Bl, M, Y, K)
	Capacity	2L Ink pack / 10 kg Ink tank (When the optional unit is used)
Maximum print width		3,240mm (127.6")
Media	Type	Sublimation transfer paper, textile
	Maximum width	3,250mm (128.0")
	Thickness	1.0 mm or less
	Roll diameter	φ250 mm (9.8") or less
	Roll weight	100 kg (220.5 lb) or less
	Roll inside diameter	3 inch
Media cutting		Auto cutting by cutter of head unit *2
Interface		Ethernet 1000 BASE-T / (USB2.0 Hi-speed)
Certifications		VCCI class A, FCC class A, ETL IEC 62368-1, CE Marking (EMC, Low voltage, Machinery directive, and RoHS), CB, REACH, RCM, KC, UKCA
Power supply		Single-phase AC200 – 240V ±10% 10A, 50/60Hz ±1Hz
Power consumption		Up to 2,400W (Max.), 800 W (when continuously operated), 4.5W (sleep mode)
Operational environment		Temperature: 20–30 °C (68–86 °F) Humidity: 35–65% Rh (Non condensing) Recommended temperature: 20–25 °C (68–77 °F) Dust level: General office level
Dimensions (W×D×H)		5,410mm x 1,075mm x 1,440mm (213.0" x 42.3" x 56.7")
Weight		925kg (2,039.3 lb)

• Some of the samples in this website are artificial renderings.
• Specifications, design and dimensions stated in this website may be subject to change without notice (for technical improvements, etc).
• The corporate names and merchandise names written on this website are the trademark or registered trademark of the respective corporations.
• Inkjet printers print using extremely fine dots, so colors may very slightly vary after replacement of the printing heads. Also note that if using multiple printer units, colors could vary slightly from one unit to other unit due to slight individual differences.

---