Specifications

Tx500-1800B
Head		On-demand Piezo head （6 printheads with 3 staggered conformation）
Maximum print width		1,820 mm
Print resolution		300dpi, 450dpi, 600dpi, 900dpi, 1,200dpi
Print mode		4 color	6/8 color
	Draft	300×300HQ/2pass/BI	300×300HQ/4pass/BI
	High Speed	300×450HQ/3pass/BI	600×450dpi/6pass/BI/HI
	Standard	600×900dpi/6pass/BI/HI	600×600dpi/8pass/BI/HI
	High Quality	600×1,200dpi/8pass/BI/HI	600×1,200dpi/16pass/BI/HI
Ink	Type	Sb300/Sb320, Rc300
	Supply system	Bottle
	Amount	2ℓ
	Color variation	Sb300/Sb320: Bl,M,Y,K,Lbl,Lm Rc300: C,M,Y,K,Lk,Bl,Or,R
Media	Width	Maximum: 1,830 mm (72"), Minimum: 210 mm (8.27")
	Thickness	Up to 5 mm
	Weight	Up to 60 kg (132lbs)
	Print aspect	Both sides
	Roll diameter	External: φ400mm (15.7"), Inner diameter of paper core: 2 inches, 3 inches
Media heater		Optional external heater
Media take-up device		Automatic take-up device (standard feature)
Print gap		Recommended 3mm (1.5mm～7.0mm Non-step adjustment）
Interface		USB2.0
Applicable standards		①VCCI: Class A　②FCC: Class A　③CE marking（EMC directive, Low-voltage directive, Machinery directive）　④RoHS
Power specification		3φY380～420V±10％　Up to 20A　50/60Hz±1Hz
Power consumption		Less than 10kVA (Optional heater is excluded. ）
Operation environments		Temperature: 20-30°C (64-86 °F); Humidity: 35-65 % RH (non condensing)
Dimensions （W×D×H）		3,830×2,600×1,800 mm (150.8"×102.4"×70.9") (Heater is exclueded)
Weight		1,840kg
Compressed air pressure		6～8 bar　40ℓ/min or more
Necessary amount of water for belt washing		50ℓ/h

Ink set

Sb300 ［Bl,M,Y,K,Lbl,Lm］	Bl　M　Y　K
	Bl　M　Y　K　Lbl　Lm
Sb320 ［Bl,M,Y,K,Lbl,Lm］	Bl　M　Y　K
	Bl　M　Y　K　Lbl　Lm
Rc300 ［C,M,Y,K,Lk,Bl,Or,R］	C　M　Y　K
	C　M　Y　K　Lk　Bl　Or　R

• Some of the samples in this website are artificial renderings.
• Specifications, design and dimensions stated in this website may be subject to change without notice (for technical improvements, etc).
• The corporate names and merchandise names written on this website are the trademark or registered trademark of the respective corporations.
• Inkjet printers print using extremely fine dots, so colors may very slightly vary after replacement of the printing heads. Also note that if using multiple printer units, colors could vary slightly from one unit to other unit due to slight individual differences.

---