Specifications

UJV300DTF-75
Print head		On-demand piezo head
Print resolution		300dpi, 600dpi, 900dpi, 1200dpi
Ink	Type/Color	UV curable flexible ink ELS-170 (C, M, Y, K) UV curable hard ink ELH-100 (White, Clear)
	Capacity	1L bottle
Ink circulation system		Available only for white ink
Max. print width		640 mm (25.2 in)
Media	Max. width	650 mm (25.6 in)
	Roll diameter	φ250 mm (9.8 in) or less
	Roll weight	45 kg (99.2 lb) or less
Interface		USB2.0 / Ethernet 1000 BASE-T
Certifications		VCCI class A / FCC class A / ETL IEC 62368-1 / CE Marking (EMC, Low voltage, Machinery directive and RoHS) / CB / REACH / Energy Star / RCM / KC
Power supply		Single-phase AC100-120 / 200-240V±10%, 50/60Hz±1Hz x 1
Power consumption		AC100V: 1.44kW or less / AC200V: 1.92kW or less
Operational environment		Temperature: 20-30 degC / 68-86 degF Humidity: 35-65% Rh (Non condensing)
Dimensions (W×D×H)		2,090 x 930 x 1,475 mm (82.3 x 36.6 x 58.1 in)
Weight		180 kg (396.8 lb)

• Some of the samples in this website are artificial renderings.
• Specifications, design and dimensions stated in this website may be subject to change without notice (for technical improvements, etc).
• The corporate names and merchandise names written on this website are the trademark or registered trademark of the respective corporations.
• Inkjet printers print using extremely fine dots, so colors may very slightly vary after replacement of the printing heads. Also note that if using multiple printer units, colors could vary slightly from one unit to other unit due to slight individual differences.

---

---

Precautions for UV printing

Inks and substrates:

• Please note that properties and adhesion, weather resistance etc. of ink and substrates can vary. Therefore please test materials before printing.
• Some substrates require primer before printing. Please test materials beforehand or ask your sales representative.

Safety notice:
You are dealing with UV light sources that may harm your health. Please follow below guidelines strictly:

• Do not look directly into the UV light source nor place your hand, or expose your skin directly to the UV light source.
• Depending upon print mode, there might occur some VOC emittance from printed parts not yet cured and hardened.
• In addition, please read the instructions and guidelines of the manual carefully and follow those.

---