PT. MIMAKI INDONESIA

JFX200-2513 [End of sale]

Specifications

JFX200-2513
Head On-demand Piezo head (Array of 2 heads stagger)
Print resolution 300, 450, 600, 900, 1,200dpi
InkType UV curable ink : LUS-120 (C, M, Y, K, W, Cl)
UV curable ink : LUS-150 (C, M, Y, K, Lc, Lm, W)
UV curable ink : LUS-200 (C, M, Y, K, W)
UV curable ink : LUS-350 (C, M, Y, K, W, Cl)
UV curable ink : LH-100 (C, M, Y, K, W, Cl)
Primer: PR-100, PR-200
Ink Supply system Supplied from 1-liter bottles for each color
Ink circulation system *1 White ink circulation using Mimaki Circulation Technology (MCT)
Maximum diagram dimensions (W×D) 2,500×1,300 mm (98.4×51.2")
MediaDimensions (W×D) 2,500×1,300 mm (98.4×51.2")
Height Max. 50 mm (2.0")
Weight Less than 50 kg/m2 (110.2 lb./ft2), non concentrated load
Media absorption  Absorption fixed through use of a vacuum
 Number of absorption
area partitions
2 partitions (X-axis direction)
Range accuracyAbsolute accuracy ± 0.3 mm (0.01") or ± 0.3% of the specified range, whichever is larger
Reproducibility ± 0.2 mm (0.008") or ± 0.1% of the specified range, whichever is larger
UV device  LED-UV system
 Standard service life *2 Over 5,000 hours
Interface USB2.0
Safety standard VCCI class A, CE Marking, CB Report, UL (U.S. safety organization), RoHS directive, UL 60950-1, FCC class A
Input power supply Single phase, 200 V AC-240 V AC, 50 Hz/60 Hz, less than 12 A
Power consumption Less than 2.88 kVA
Installation environmentTemperature 15 – 30 °C (59 – 86 °F)
Relative humidity 35 – 65 %Rh
Accuracy maintained temperature 18 – 25 °C (64.4 – 77 °F)
Temperature gradient Less than ± 10 °C/h (± 18 °F/h)
Dust Similar to standard office environments
Install Dimensions (W×D×H) 4,400×2,250×1,250 mm (173.2×88.5×49.2")
Assembled Dimensions (W×D×H) 4,400×2,450×1,250 mm (173.2×96.4×49.2")
Weight 650 kg (1,433 lbs.)

*1 MCT works only with white ink.
*2 The standard service life times listed are estimates and do not guarantee the operation.
・Inks would not be cured when printing speed is faster than that of draft mode.

  • Some of the screens and printing samples in this website are artificial renderings.
  • Specifications are subject to change without notice.
  • All trademarks or registered trademarks are the property of their respective owners.
  • Inkjet printers print using extremely fine dots, thus colors may vary slightly following replacement of the printing heads. Also note that if using multiple printer units, colors may vary slightly among the units due to slight individual differences among the units.



Precautions for UV printing

Inks and substrates:

  • Please note that properties and adhesion, weather resistance etc. of ink and substrates can vary. Therefore please test materials before printing.
  • Some substrates require primer before printing. Please test materials beforehand or ask your sales representative.

Safety notice:
You are dealing with UV light sources that may harm your health. Please follow below guidelines strictly:

  • Do not look directly into the UV light source nor place your hand, or expose your skin directly to the UV light source.
  • Depending upon print mode, there might occur some VOC emittance from printed parts not yet cured and hardened.
  • In addition, please read the instructions and guidelines of the manual carefully and follow those.

JFX200-2513 Catalog (2.79MB)pdf file

Model

JFX200-2513 Maximum print area: 2,500 x 1,300 mm (98.4 x 51.2")

Related products

Return to Content

PAGETOP