Specifications

JV400-130/160SUV
Head		On-demand Piezo head (Array of 2 heads in-line)
Maximum width		1,361mm (53.6") / 1,610mm (63.4")
Print resolution		600、900、1,200dpi
Print speed	Draft	18.1㎡/h (900×900dpi、6pass, bi-directional, 4 color)
	Standard	14.2㎡/h (900×1,200dpi、8pass, bi-directional, 4 color)
Ink	Solvent UV ink SU100	4 color ( C, M, Y, K )
	Ink supply system	600 ml ink pack
Media	Width	Up to 1,371mm (54.0") / 1,620mm (63.8")
	Weight	Up to 25kg (55.1 lbs)
	Roll diameter	Up to φ180mm (7.1")
	Inside roll diameter	2-3 inch
	Print aspect	Inside / outside
	Cutter	Y-direction cutter after head section
Drying device		3 way intelligent heater (Pre/Print/After), Ventilation fan unit
UV curing unit		Equipped with fluorescent UV tube lamp
Media take-up device		Roll take-up device, inside/outside selectable
Interface		USB2.0
Applicable standard		VCCI class A, FCC class A, UL 60950-1 CE Marking (EMC, Low voltage and Machinery directive), CB Report
Power specification		AC 100～120V±10% or AC 200～240V±10%
Power consumption	100 - 120V	1,440W × 2
	220 - 240V	1,800W × 2
Operational environment		Temperature: 20°C-30°C (68-86 °F); Humidity: 35-65 % RH (non condensing)
Dimensions (W×D×H)		2,630×855×1,435mm (103.5"×33.7"×56.4") 2,875×855×1,435mm (113.2"×33.7"×56.4")
Weight		241kg (531 lbs.) / 259kg (570 lbs.)

*600 ml ink pack requires eco cartridge (OPT-J0237).
　Eco cartridges can be used repeatedly by replacing ink packs.
*Inks would not be cured when printing speed is faster than that of draft mode.

Ink set

SU100 ［C,M,Y,K］	C　M　Y　K

• Some of the samples in this website are artificial renderings.
• Specifications, design and dimensions stated in this website may be subject to change without notice (for technical improvements, etc).
• The corporate names and merchandise names written on this website are the trademark or registered trademark of the respective corporations.
• Inkjet printers print using extremely fine dots, so colors may very slightly vary after replacement of the printing heads. Also note that if using multiple printer units, colors could vary slightly from one unit to other unit due to slight individual differences.

---

---

Precautions for UV printing

Inks and substrates:

• Please note that properties and adhesion, weather resistance etc. of ink and substrates can vary. Therefore please test materials before printing.
• Some substrates require primer before printing. Please test materials beforehand or ask your sales representative.

Safety notice:
You are dealing with UV light sources that may harm your health. Please follow below guidelines strictly:

• Do not look directly into the UV light source nor place your hand, or expose your skin directly to the UV light source.
• Depending upon print mode, there might occur some VOC emittance from printed parts not yet cured and hardened.
• In addition, please read the instructions and guidelines of the manual carefully and follow those.

---