Mimaki Driver Ver.5.4.2 (64bit)
| Type | Device Driver |
|---|---|
| Version | 5.4.2 |
| Release date | 08/20/2021 |
| Supported OS |
Windows 8.1 (64bit) Windows 10 (64bit) Windows 11 |
| Supported Products | CG-60SRIII, CG-100SRIII, CG-130SRIII, CJV150-75, CJV150-75BS, CJV150-107, CJV150-107BS, CJV150-130, CJV150-130BS, CJV150-160, CJV150-160BS, CJV300-130, CJV300-130 Plus, CJV300-130BS, CJV300-160, CJV300-160 Plus, CJV300-160BS, JV100-160, JV150-130, JV150-130A, JV150-130BS, JV150-160, JV150-160A, JV150-160BS, JV300-130, JV300-130 Plus, JV300-130A, JV300-130BS, JV300-160, JV300-160 Plus, JV300-160A, JV300-160BS, JV300-190, TS100-1600, UCJV300-75, UCJV300-107, UCJV300-130, UCJV300-160, UJF-3042MkII, UJF-3042MkII EX, UJF-6042MkII, UJF-7151 plus, UJF-A3MkII, UJF-A3MkII EX, UJV100-160 |
Note for use
When using the following firmware versions, please do not update the version of Mimaki Driver to Ver.5.3.3 or later.
- JV100-160 : ver.3.1 or earlier
- TS100-1600 : ver.3.1 or earlier
- UJV100-160 : ver 5.1 or earlier
The following functions have been change
[Ver.5.4.1 -> Ver.5.4.2]
- The following models are available.
UCJV300
[Ver.5.4.0 -> Ver.5.4.1]
- The following models are available.
UJF-7151, UJF-6042MkII, UJF-3042MkII, UJF-3042MkII EX, UJF-A3MkII, UJF-A3MkII EX
[Ver.5.3.3 -> Ver.5.4.0]
- The following models are available.
JV300, JV150, JV300Plus, CJV300, CJV150, CJV300Plus
[Ver.5.3.0 -> Ver.5.3.3]
- Image quality defects that occur under certain conditions have been improved.
[Ver.5.1.0 -> Ver.5.3.0]
- TS100 are available.
- Improved operation during Ethernet communication. (JV100, UJV100)
[Ver.5.1.0]
- JV100 is available.
Precautions for download
Be sure to read the following license agreement before downloading this software.
Software License Agreement
By installing this software, you agree to be bound by this agreement.
Article 1 Definition
- Software means the computer program supplied with this agreement.
- Related data means printed text data supplied with this software or printed data which we may supply subsequently.
- This software means the software, related data and the copy of this software which we supply to you.
Article 2 Limitations
- This software must not be copied against the provisions of this agreement.
- This software must not be changed or reverse engineered. Moreover, it must not be transferred, leased or sublicensed to the third party. The status of this agreement must not be transferred, either.
- This software must not be transferred, licensed or resold to the third party or transferred, licensed or purchased from it by rental or false rental activity.
- This software must not be transferred or licensed to the third party or purchased from it as secondhand goods.
Article 3 Limitation of Warranty
- It is not warranted that functions contained in this software suit the intended use of the customer.
- This software should be selected and introduced in the customer’s responsibility: any damage in installing this software in the computer’s hard disk and the plotter’s memory is not covered.
- We accept no responsibility for any results of the use of this software (including lost earnings or profits).
Article 4 Term of Validity
- The term of validity of this agreement starts when the customer installs this software.
- When the customer decides to stop using this software, this agreement is automatically terminated.
- This agreement is terminated immediately, without our notice, if the customer does not follow any clause of this agreement. If this agreement terminates, the whole of this software must be deleted.