Specifications

		Kebab MkII	Kebab MkII L
Compatible printer model		UJF-3042MkII/MkII e UJF-3042MkII EX/EX e	UJF-6042MkII/MkII e UJF-7151 plus/plusII
Rotary degree of printing material		Over ±360 degree
Rotation system		Rollers
Applicable objects		Cylindrical objects (uneven surface may affect rotation)
Applicable roundness		Under 0.5mm (0.01in) *Accuracy is not guarantee
Printable size		Length: 30mm-300mm (1.1in-11.8in) Diameter: 10mm-110mm (0.3in-4.3in)	Length: 30mm-600mm (1.1in-23.6in) Diameter: 10mm-110mm (0.3in-4.3in)
Printable area	Feeding direction (X)	Entire surface of the material
	Print head moving direction (Y)	Under 300mm (11.8in)	Under 600mm (23.6in)
Maximum weight of print material		Small diameter: under 1.5 kg Large diameter: under 2 kg
Interface		Exclusive connector
Certifications		VCCI Class A / FCC Class A / Safety standard / CE Marking / RoHS / REACH
Installation environment	Temperature	20-35 ºC (68-95 ºF)
	Relative humidity	35-65％Rh
	Recomended Temperature	20-25 ºC (68–77 ºF), Allowable rate of change of temperature: Under±10 ºC/h (±50 ºF/h)
	Dust level	General office level
Weight		Approximately 3 kg (6.6 lb)	Approximately 6 kg (13.2 lb)
Dimensions (W x D x H)		366 mm x 301 mm x 50 mm (14.4 in x 11.8 in x 1.9 in)	674 mm x 301 mm x 50 mm (26.53 in x 11.8 in x 1.9 in)

• Some of the screens and printing samples in this website are artificial renderings.
• Specifications are subject to change without notice.
• All trademarks or registered trademarks are the property of their respective owners.
• Inkjet printers print using extremely fine dots, thus colors may vary slightly following replacement of the printing heads. Also note that if using multiple printer units, colors may vary slightly among the units due to slight individual differences among the units.

---

---

Precautions for UV printing

Inks and substrates:

• Please note that properties and adhesion, weather resistance etc. of ink and substrates can vary. Therefore please test materials before printing.
• Some substrates require primer before printing. Please test materials beforehand or ask your sales representative.

Safety notice:
You are dealing with UV light sources that may harm your health. Please follow below guidelines strictly:

• Do not look directly into the UV light source nor place your hand, or expose your skin directly to the UV light source.
• Depending upon print mode, there might occur some VOC emittance from printed parts not yet cured and hardened.
• In addition, please read the instructions and guidelines of the manual carefully and follow those.

---