PT. MIMAKI INDONESIA

CJV30BS Series [end of support]

Specifications

 CJV30-60BSCJV30-100BSCJV30-130BSCJV30-160BS
Maximum print /
cut width
610 mm (24.0") 1,020 mm (40.1") 1,361 mm (53.5") 1,610 mm (63.3")
Print resolution 540 dpi, 720 dpi, 1440 dpi
Print mode
(Scan x Feed)
540 x 720dpi, 540 x 900dpi, 540 x 1,080dpi
720 x 540dpi, 720 x 720dpi, 720 x 1,080dpi, 720 x 1,440dpi
1,440 x 1,440dpi
InkKind Exclusive solvent ink: BS3 ink
Capacity
MediaWidth 620 mm (24.4") 1,030 mm (40.5") 1,371 mm (53.9") 1,620 mm (63.7")
Thickness Less than 1.0 mm
Roll weight Less than 25 kg (55 lbs.)
Roll diameter Inside: 2 inch, 3 inch / Outside: Less than φ180 mm (7.1")
Maximum cutting speed 30 cm: 11.8"/s (42 cm: 1 6.5"/s at the angle of 45)
Cutting force 10-350 g
Applicable tools Cutter, Water based ball-point pen,
Oil based ball-point pen
Media cutting Cutting in Y direction by cutter on the head
Media heater Pre/print/post heater
Media take-up device Roll take-up device (Standard), inside/outside selectable
Command MRL-III , MGL-IIc2
Interface USB 2.0
Applicable standard VCCI class A, FCC class A, UL60950,
CE Marking (EMC directive, low voltage directive),
CB report
Power AC100V~240V, Less than 1,380VA
Operation environments 20°C~35°C, 35~65%RH (No condensation)
Dimensions
(W x D x H)
1,524 x 739 x
1,424mm
(60" x 29.1" x
56.0")
1,934 x 739 x
1,424mm
(76.1" x 29.1" x
56.0")
2,289 x 739 x
1,424mm
(90.1" x 29.1" x
56.0")
2,538 x 739 x
1,424mm
(99.9" x 29.1" x
56.0")
Weight 110kg
(242 lbs.)
130kg
(286 lbs.)
145kg
(319 lbs.)
160kg
(352 lbs.)

Ink set

BS3
[C,M,Y,K]
C M Y K
  • Some of the samples in this website are artificial renderings.
  • Specifications, design and dimensions stated in this website may be subject to change without prior notice(for technical improvements, etc).
  • The corporate names and merchandise names written on this website are the trademark or registered trademark of the respective corporations.
  • Inkjet printers print using extremely fine dots, so colors may vary slightly after replacement of the print heads. Also note that if using multiple printer units, colors could vary slightly from one unit to other unit due to slight individual differences.

Model

CJV30-60BS Maximum print/cut width: 610 mm (24.0")
CJV30-100BS Maximum print/cut width: 1,020 mm (40.2")
CJV30-130BS Maximum print/cut width: 1,361 mm (53.6")
CJV30-160BS Maximum print/cut width: 1,610 mm (63.4")

Corresponding Ink

Application list

  • Sign & Display
  • Banner
  • Poster
  • POP
  • Vehicle Wrapping
  • Wallpaper
  • Cutting Sheet Sticker
  • Labels & Decals
  • Proof
  • POS Display

Related products

Return to Content

PAGETOP