Specifications
KEBAB | ||
---|---|---|
Compatible printer model | UJF-3042HG, UJF-6042 | |
Rotary unit | Rotary degree of print material |
Over ±360 degree |
Rotation system | Rollers under print material | |
Print material | Applicable objects | Cylindrical objects (uneven surface may affect rotation) |
Printable size | Diameter:10mm~110mm (0.39in~4.33in) * When the diameter is less than 64mm, attach a suction table. Length:30mm~330mm (1.18in~12.99in) |
|
Maximum weight of print material |
3kg (6.61lb) | |
Printable area of UJF-3042HG on KEBAB | Feeding direction (X): Entire surface of the material Print head moving direction (Y): 300mm (11.81in) or narrower |
|
Interface | Exclusive connector | |
Installation environment | Temperature | 20℃~35℃ |
Relative humidity | 35~65%Rh | |
Guaranteed precision range |
20℃~25℃ (Allowable rate of change of temperature: ±10℃/h) | |
Dust level | General office level | |
Weight | Approx. 3kg (6.61lb) | |
Dimensions(W×D×H) | 410mm×330mm×57mm (16.14in×12.99in×2.24in) |
- Some of the screens and printing samples in this website are artificial renderings.
- Specifications are subject to change without notice.
- All trademarks or registered trademarks are the property of their respective owners.
- Inkjet printers print using extremely fine dots, thus colors may vary slightly following replacement of the printing heads. Also note that if using multiple printer units, colors may vary slightly among the units due to slight individual differences among the units.
Precautions for UV printing
Inks and substrates:
- Please note that properties and adhesion, weather resistance etc. of ink and substrates can vary. Therefore please test materials before printing.
- Some substrates require primer before printing. Please test materials beforehand or ask your sales representative.
Safety notice:
You are dealing with UV light sources that may harm your health. Please follow below guidelines strictly:
- Do not look directly into the UV light source nor place your hand, or expose your skin directly to the UV light source.
- Depending upon print mode, there might occur some VOC emittance from printed parts not yet cured and hardened.
- In addition, please read the instructions and guidelines of the manual carefully and follow those.
Model
KEBAB | Compatible printer model: UJF-3042HG, UJF-6042 |
---|
Application list
- Industrial Print
- Cylindrical Print